RAMLIGHT 1.0    RAMdisk activity indicator TSR

RAMLIGHT is a TSR which provides an activity indicator for ramdisks in the
form of a blinking rectangle in the upper right corner of the screen.
Whenever any access is made to a drive that is being monitored, whatever
is currently in that position is replaced with a bright white rectangle;
approximately one-tenth of a second later, the previous contents are
restored. Each access resets the timer, so if additional accesses are made
while the white rectangle is on the screen, it will not be removed until
one-tenth of a second after the last access.

RAMLIGHT requires DOS version 2.0 or better. It uses about 11K of
conventional memory while installing itself; when resident, it requires
848 bytes of conventional memory when monitoring one drive, and an
additional 48 bytes for each additional drive monitored.

James W. Birdsall, 11112 NE 124 LN #D204, Kirkland, WA 98034
COMPUSERVE:  71261,1731       GENIE:  J.BIRDSALL2
INTERNET:
  (the following are alternate addresses for the same place):
     support@picarefy.com
     picarefy!support@amc.com
     picarefy!support@netcom.com
     amc-gw!picarefy!support@coco.ms.washington.edu
     uunet!uw-coco!amc-gw!picarefy!support

  +---------------------------------------------------------------+
  |   From the America Online - New Product Information Services  |
  +===============================================================+
  | This information was processed from data provided by the      |
  | above mentioned company. For additional details, contact the  |
  | company at the address or telephone number indicated above.   |
  |    All submissions for this service should be addressed to    |
  |   BAKER ENTERPRISES, 20 Ferro Drive, Sewell, NJ 08080 U.S.A.  |
  +---------------------------------------------------------------+
